how to remove oil from a bowling ball

You may wonder in the same way as several how to remove oil from a bowling ball?

After several game tutorials, your bowling ball will absorb the oil and dirt from the lane. At first, it will form an apparent oil ring near the ball area. If you don’t clean the ring as soon as possible, it will end up being absorbed by your resin coating material. Then, make the ball alter its opposition to the rail, and you will not be able to get the same response as before. Your ball is going to be more complicated to catch, and its release is going to be more complicated. The proper caution on your bowling ball will prolong its history.

There are several effective procedures you can use to get the oil out of the ball and keep it at its maximum effectiveness over the longest possible time. Before that, you need to understand when you need to clean the ball. It will help you in sustaining the condition of the ball. It is very convenient to clean the bowling ball at home; however, your alternative would be to take it to a pro-shop. Otherwise, you can do the process yourself if you have your own oil extraction machine.

The expert stores are equipped with superior speedball spinners and different Abralon grains or other screening pads. The expert stores have all the necessary accessories to fill the job correctly.

Specific warnings and steps to clean your bowling ball from oil are Using an oil extraction machine.

How to Remove Oil from a Bowling Ball

Take your ball to your local golf store.

Even if you are a professional bowler, you are unlikely to own your own focused ball bowling ball cleaning machine. These machines are primarily water tanks that are heated to open the pores of the ball and remove the deep-rooted oil. You should be able to find one of these machines in most expert bowling stores.

How to Remove Oil from a Bowling Ball

Have a professional store employee clean your ball

This system tends to be subjectively cheap, and having a professional clean and polish your ball affirms a complete clean. Beyond that, your professional will be able to indicate damage that you might not have otherwise noticed.

The time it takes your pro store to clean your ball may change, but you can usually expect the ball to take precisely one and a half hours to clean. If you have a free ball, this is plenty of time for you to get some games in.

Alternatively, you can run errands, do some chores, read a book, or play a portable game while you wait. That way, you won’t get bored while cleaning the ball.

bowling ball oil extractor

Play like a champion

At this point that the ball is clean and polished, it should have regained the same rail opposition it initially possessed. Continue to wipe your ball with a towel after pitches and clean it after each game to sustain its condition.

how to clean a bowling ball

Ball cleaning spray

One of the most natural procedures is to clean the ball with ball cleaning sprays. If you want to spray clean blowing balls, it is ideal for taking equal parts of water and simple green alcohol; ideally, mix it in a spray bottle. Spray the ball and wipe it with a towel between each shot to remove the apparent oil ring in the ball area. It will provide help in cleaning the oil before the cover material absorbs it. It is found inside superior bowling ball cleaners. If you don’t have one, I suggest you buy this better spray cleaner.

how to bleed a bowling ball

Clean the ball with isopropyl alcohol

  • Cleaning with isopropyl alcohol is a light way to remove oil. Here is a reduced development to clean the ball with alcohol.
  • Prepare a bucket of water and stir in isopropyl alcohol. The ratio of water to isopropyl alcohol should be 4:2.
  • Dip a towel in the satisfaction and wring out the towel.
  • Sweep the ball with the towel.
  • Let it rest in a safe space.
  • This way, you can remove the oil from the bowling ball at home.

Home immersion method (DIY method)

Do-it-yourself procedures are one of the most practical ways to remove oil from your ball. At this point, we will describe how to remove oil from a bowling ball in the home immersion procedure by following a few simple steps:

Step 1:

First, you have to fill a bucket with hot water. The hot water will help you to lift the dirt from the ball area since oil is lighter than water. You can combine some cleaning agents or dishwasher with water in the bucket to achieve the most remarkable result. I suggest this as a dishwasher for cleaning bowling balls. The right cleaning agents will help you remove the dirt from the entire ball area. Be sure to allow enough time for the balls to enter the pores.

Step 2:

You should take the ball and place some waterproof tape over the finger holes. Make sure the hole is completely covered with a tap and that there is no space. If water gets into the ball’s finger holes, it can change its performance. That’s why it’s essential to make sure the tap covers each fingertip.

Step 3:

At this point, immerse the ball in the bucket. Soak your ball in hot water over time long enough so that no dirt is left on the ball cover. The soaking time should be twenty or thirty minutes.

Step 4:

After soaking the ball for well over twenty minutes, remove the ball from the bucket. To prevent the ball area from dripping water into the finger holes, you should hold the tap until it dries.

Step 5:

At this point, take a towel or cloth to wipe the ball. We suggest you choose a microfiber towel because a microfiber towel can absorb oil seven times more than linen towels. Only when the ball is completely dry should you remove the tap. Once this is done, ideally you should repeat the procedure, and then take it out again to remove any remaining moisture, and your ball is now completely clean and ready to return to the track! Rejuvenate your bowling ball with these simple steps.

Check our guide on the Best Bowling Shoes for Sliding.

Frequently Asked Questions

How often do you have to remove the oil from a bowling ball?

We suggest that you clean your bowling ball after every six games. Proper cleaning of the ball can assist you in sustaining its condition. According to the developers, your ball will experience little damage after every fifty to seventy-five games. For that reason, the ball must be re-rolled to remove the oil. It will regain its initial opposition to the lane after resurfacing. The clearest idea is to let the pro store do the deep cleaning and resurface the ball.

How does oil damage a bowling ball?

A ball thrown in the middle of the lane has more adversity to catch the lane as it travels through the oil, and then it will stay straighter for longer. On the other hand, a ball thrown away from the high concentration of oil in the middle will be able to catch the center.

What is the most challenging oil pattern in bowling?

Badger (52 feet) is the most extensive PBA animal oil pattern, get ready to bowl straight by keeping your breakpoint closer to your pocket.

Bear (40 feet) a flat pattern that has been characterized as the most complicated test in professional bowling with a flat 1 to 1 side to side oil ratio.

Last Words

Cleaning the bowling balls yourself is now simpler than ever. Only purchasing personal squeeze bottles of ball cleaning substances available at expert stores, or very inexpensive ones will provide the right agents to clean your ball by hand. We suggest purchasing microfiber towels and liquid ball cleaner to keep your ball area clean and ready to use. Microfiber towels absorb oil seven times more moisture than linen towels and are great for cleaning oil from the ball area throughout your ball session. Besides, microfiber towels are great for cleaning the size of your bowling ball by using cleaner substances after your session is over and for cleaning rubber marks on the pits cushions in the bowling alley or on the belts of the ball return entities.

It is suggested to clean the ball area by hand instantly after bowling when the pores of the ball cover are free thanks to the friction generated by the ball travelling on the lane. On the other hand, there are liquid cleaning agents approved for use by USBC (United States Bowling Congress) throughout the rivalry. At this time you have the alternative of cleaning your ball with a towel and a cleaner while bowling.

Each bowler

Has his preferred procedure for cleaning his bowling balls. In this text, we did our best to look at the ways to remove the oil from the bowling ball.

If you want to sustain your condition and the initial opposition of the lane, you must clean and re-pave your bowling balls regularly. Proper cleaning and polishing bowling ball can assist you in having fun bowling like a champion.

Bowling ball oil extraction can be a bit tedious if it is not done by a professional. A bowling ball cleaner machine can also be used for proper cleaning.