How to Clean a Bowling Ball with Rubbing Alcohol

Fans of bowling often wonder how to clean a bowling ball with rubbing alcohol? Like some sports outfits, a bowling ball must remain clean for optimal performance scenarios.

Many changes affect your bowling score. You are holding the unmatched ball rules out one of the opposing causes. You can clean your bowling balls easily at home.

Cleaning your bowling ball is essential. Reactive balls absorb oil, and an oil-saturated ball will not have enough friction to catch.

When a ball needs to be cleaned up, you will have to bake and re-roll the ball. This can make you invest a lot of time, and sometimes it is expensive. There are ways to bake your ball at home, but getting your local cleanup is the easiest and most common way. So, to save money and time, the most creative thing to do is clean your ball with little continuity and only when it is essential.

Clean the bowling ball whenever you play and it will need to be baked with much less continuity.

How to Clean a Bowling Ball with Rubbing Alcohol: Cleaning Process

If you need a light cleaning, cleaning your ball with rubbing alcohol applied only to a lint-free microfiber towel is an acceptable way to do it. However, the following procedure is the actual cleaning of the bowling ball, and it works to remove the oil from the depth of the ball’s pores. However, the compensation is that too much deep cleaning can lead to cracks and fissures in the bowling ball’s shell.

If you play regularly on oily lanes, a deep cleaning is suggested every 50 games or so. Regulated lanes were needless, with an average of 75-100 games recommended. Just keep an eye on your ball. If your bowling ball’s action is starting to get boring, it’s probably time for a deep clean.

• Use waterproof tape to cover the finger holes of your bowling ball. Make sure there are no cracks through which water can leak. Make the tap as flat as you can over the ball area, using a piece of tape plus if required to ensure coverage.
• Fill a bucket with hot water. Remember, enough to submerge the entire ball. Oil is faster than water, so this procedure works to remove the oil from the ball’s pores enclosed with any dirt that may have been trapped in it. For a higher effect, soak the ball for about 20 minutes.
• Finally, lift the ball out of the bucket. Dry the bowling ball with a lint-free towel and the tape still in place. Remember to avoid removing excess water that may have collected near the seams of the tape. When the ball is dry, remove the tape and carefully dry it again.

What do I need to clean my bowling ball?

Alcohol

The performance and opposition of a bowling ball are eliminated with just some alley oil or a wear mark.

The wax from the lanes also makes an unwanted build-up in the ball area.

Clean the porous exterior area of a bowling ball with isopropyl alcohol to remove dirt, grease, and contaminants. You will need to wipe the ball vigorously with an alcohol-soaked towel or microfiber cloth as soon as possible after bowling. Do not immerse the entire bowling ball in alcohol over some time.

Avoid oil build-up to make cleaning easier, your ball after each game to sustain its condition. It is best if the ball towel is a lint-free microfiber cloth. The microfiber cloths will protect your ball’s finish, and the lint-free cloth will prevent the threads and pieces of material from rubbing against the ball and influencing your game.

To achieve the impressive results and the firmest throws, dry the ball with a towel after each shot. In the course of a long game, you may want to change a clean towel right in the middle of your game.

Moisten your rag with isopropyl alcohol

Remember that when you finish bowling, the ball will be hot from the friction of the lane. This heat opens the pores of your ball, making it easier to clean the ball. Some alcohol is helpful, so use it sparingly to soak the rag and then clean the entire ball area.

When you have cleaned the ball with your cloth dipped in alcohol, take a dry section of your towel or a clean towel and wipe off any remaining moisture from your area.

Clean the ball regularly. The longer the oil remains in the ball area, the more likely it is to sink and be more difficult to remove. This means that by cleaning the ball every time you throw, the ball will stay cleaner for longer.

This can save you professional cleaning and assist you in having more consistent bowling fun.

Ball Cleaners

Use alcohol-based liquid or gel ball cleaners, also called ball polishers, to regularly clean your bowling ball and give it an exciting shine.

Bowling ball cleaners with added degreasers or surfactants to remove stubborn dirt, bowling ball cleaners and polisher are best for cleaning the bowling ball.

Surfactant cleaners lift the dirt from the microscopic pores of the ball covering material or the outer shell. Clean the ball with alcohol to remove loose dirt.

Get a personal rotary ball for use with cleaners if you are a recurring bowler. Rotate the ball in the machine while applying cleaners. Many people use a spray bottle to clean their balls.

Can you use Windex to clean a bowling ball?

You can use a bowling ball cleaning agent approved by the U.S. Bowling Congress, such a Windex. Still, it may not be the generally preferable homemade bowling ball cleaning alternative that there is, at least not as an exclusive alternative.

However, Windex is not designed to get oils out of the bowling ball’s pores.

So, you may still need to use something like isopropyl alcohol attached to Windex to clean the bowling ball shell intensively.

Windex may be the right choice if your ball was damaged by more than just oil on the lanes, but there are more bowling ball cleaning options for you.

How do I properly clean the finger holes in my bowling ball?

You will never want to soak your bowling ball with the free finger holes, nor will you want to wash the inside of the finger holes with any cleaning substance.

• It can cause considerable inconvenience not only to the feel of the finger holes but also to the bowling ball’s core and weight block sector.
• The highlight you can do is finding a dry, lint-free microfiber towel and thoroughly clean the inside those holes where fingers fit.
• Take advantage of your finger to insert the towel with stable force into the ball. Please, take care to clean all sides of each hole and the edge of the finger hole.
• Make sure the towel you are using does not have any ball pre-cleaning oils or any cleaning substances you have been using to clean the cover.
• A homemade bowling ball can also be an efficient alternative.

What continuity should I improve my bowling ball?

Your bowling ball and its covering material will play a vital role in the continuity you should improve and rub the ball again.

If the ball has been used well and is not in top condition overall, it is up to you to improve it and scrape it every ten games precisely.

You can use a homemade bowling ball cleaner as an alternative. The bowling ball cleaning machine can be used very well to clean.

Because it already suffers from coverage stock issues that possibly add a level of inconsistency to its lane action, regular polishing is imperative to exploit a utility that is worn out entirely.

You can use waterproof tape.

The newest bowling balls with a shiny cover do not need much polishing and scraping work, and the established standard is precisely every 30 games.

We suggest a completed resurfacing job every 60-100 games concerning the lanes you play on regularly concerning the oil and general condition of the lanes.

Can you use Acetone to clean a bowling ball?

Materials as Acetone are an incredibly harmful initiative for cleaning choices, as it is known to weaken polyester-filled balls and remove enamel from some balls when used very independently.

Acetone is incredibly strong, and while some expert stores have faith in it in moderation, there are much safer choices that work to get the oil out of the ball’s pores and simultaneously remove the dirt.

There are many stories on YouTube and online forums about how Acetone killed off the general opposition and weakened its structure.

It is something you might want to avoid unless there is something clumped on the ball as superglue. If you choose a homemade bowling ball cleaner, isopropyl alcohol is a much safer and slower alternative for your covering material’s health. The bucket is also essential to keep clean.

How to Clean a Bowling Ball with Rubbing Alcohol: FAQ

How do you clean a bowling ball at home?

Use equal parts of Easy Green, rubbing alcohol, water, and stir in a spray bottle, making a simple and effective bowling ball cleaner. No matter how much you clean and wipe your bowling ball, the oil will still seep into the deck, and it’s a must.

Can I clean the bowling ball with Windex?

It’s safe to use Windex and a microfiber towel to clean your bowling ball. Just keep in mind that Windex is only right for quick surface cleaning.

Can I use rubbing alcohol to clean a bowling ball?

Clean the bowling ball’s outer porous area with isopropyl alcohol to remove dirt, grease, and contaminants. Clean the ball vigorously with an alcohol-soaked towel or microfiber cloth as quickly as possible after bowling. Do not immerse the entire bowling ball in alcohol over a while.

Read More: How to Resurface a Bowling Ball With A Spinner

Conclusion

There are bowling balls cleaning configurations accessible to you. that already have a chance to be in your home. This concerning if you’re avoiding commercial bowling ball cleaners with the promise of saving money or only like the DIY configurations to hold your ball in unparalleled fashion.

Clean bowling ball finger holes is essential and this can leave you with better shooting efficiency. Having clean bowling balls is vital in this step.

Remember to train these configurations with caution, as improper cleaning and compliance with the above steps your bowling ball. However, when done right, homemade bowling ball cleaners do the trick and will help you maximize your bowling ball for superior scores and preferable viable shooting action. Dish soap is also a good alternative. You can use a bowling ball polisher to polish it.